HCL20 Assembly

Step 10 - continued:

Fit the door to the assembled unit - locate the door hinge onto the hooks at the front of the hinge plate and press the rear part of the hinge to lock it into position (see below). You will feel a ‘click’ when it is correctly positioned. IMPORTANT: Continue to support the door while fitting the other hinges. Failure to do so will result in damage to the unit and / or hinges. Adjust hinge plates accordingly. Fit the Push-to-open piston - this is to be positioned in the centre (circa) of the mullion front edge regardless of door configuration. When determining placement of the piston please consider the appropriate height of ‘press point’ for the user when opening the door. We recommend using the dedicated jig as listed in our Product Guide - alternatively create a 5mm (circa) pilot hole before drilling for a 10mm diameter hole to suit the piston. No glue is required for securing the body of the piston.

Connect the LED lighting to the mains supply.

Box wine rack - optional

Locking tabs are to the rear of the plate.

Locating hooks are to the front of the hinge

Push-to-open piston

1) Locate hinge into front hooked part of the hinge plate.

2) Push the rear part to lock into place. It will ‘click’ into position.

Door mounted spice rack - optional.

The unit is now complete.