HCL20 Assembly

Assembly

Step 9 - Mullion attachment: You will need the following parts:- Unit shell assembly. Mitred strip panels x 2. Mullions x 2. Hi-Lo Screws x 6.

With the unit shell assembled, locate the x 2 long, thin panels with mitre cut edge. Position each within the cabinet and position as shown below.

Fix through the surface area of the mitre panels through into the outer side cheeks of the unit shell to secure them. These mitred panels will be hidden by the mullions so screws can be on show - the raw material of the mitre edge sits flush with the cabinet front.