Style Guide April 2023 Full

Technical Planning Information

Corner Post & Wall Applications - 071N Planning

Parts highlighted in white = 071N

Parts highlighted in red = MFC support

Drawer line corner base blank application

Minimum dimensions for corner post installation = 54mm x 54mm

Recommended Maximum dimensions for corner post installation = 118mm x 118mm

118mm (MFC panel)

54mm (MFC panel)

100mm

100mm

36mm 36mm

Planning notes:

•The minimum 54 x 54mm corner post allows clearance of the door/drawer (18mm) to open with the handle (34mm - handles vary) with the additional 2mm to ensure the doors/drawers do not collide. The dimensions, 54mm x 54mm, refer to the external of the corner post. Note: Door thickness can vary between 18mm - 23mm.

•The maximum 118 x 118mm corner post provides a large clearance for the doors/drawers to open. The dimensions, 118mm x 118mm, refer to the internal of the corner post.

•When planning into corners, beware of obstructions that may prevent the corner blank cabinet resting into the corner. It is good practice to use a cabinet with a maximum of 500mm blank to allow circa 100mm clear space at the wall corner. •If soil pipes are present as shown, these should be measured & taken into consideration when choosing your corner base cabinet.

Parts highlighted in white = 071N

Parts highlighted in red = MFC support

Wall corner base blank application

Minimum dimensions for corner post installation = 54mm x 54mm

Recommended Maximum dimensions for corner post installation = 118mm x 118mm

118mm (MFC panel)

54mm (MFC panel)

100mm

100mm

36mm 36mm

Planning notes:

Note: The minimum dimension for the corner post when using BOSS Bar handles is 100mm, NOT 54mm. Note: The 071N is a slab door available in ALL ranges. We recommend using this 071N door frontage to achieve a consistent run with the doors/drawers, however it is not imperative to use the 071N for a corner post. The 071N is not supplied with the corner cabinet and must be ordered separately. Please also note in most ranges, the 071N is only available at 715mm high. •Wall corner blank cabinets also allow for obstructions in room corners. It is common place for copper pipe work as shown to travel vertically at this point. Our corner solution allows for clearance to exist when planning a perfect corner solution.

89

i