Style Guide 2021

Technical Planning Information

Corner Post & Wall Applications - CCP70

Style - CCP70 Corner Posts

Drawer line corner base blank application

Parts highlighted in white = corner post

Parts highlighted in red = MFC support

CCP70 (Std Design) & CCP70 (Interra High Gloss, Ravello Silk ranges with the integrated J handles)

Planning notes:

•When planning into corners, beware of obstructions that may prevent the corner blank cabinet resting into the corner. It is good practice to use a cabinet with a maximum of 500mm blank to allow circa 100mm clear space at the wall corner.

•If soil pipes are present as shown, these should be measured & taken into consideration when choosing your corner base cabinet.

Wall corner base blank application

Parts highlighted in white = corner post

Parts highlighted in red = MFC support

CCP70 (Std Design) & CCP70 (Interra High Gloss, Ravello Silk ranges with the integrated J handles)

Planning notes:

•Wall corner blank cabinets also allow for obstructions in room corners. It is common place for copper pipe work as shown to travel vertically at this point. Our corner solution allows for clearance to exist when planning a perfect corner solution.

Additional information:

•The corner posts are supplied at 720mm standard. If required for a 288, 360 or 575mm wall unit, the post must be cut down. The corner posts are not available beyond 720mm.

88