Style Guide 2021

Technical Planning Information

Style - Hanging Brackets

Wall cabinet hanging bracket position & detail. (Note 150kg per pair)

Below are details on how to position & adjust the wall hanging brackets. We have highlighted details that are specifically relevant to the kitchen installer & / or the end user.

Wall hanging plate - to be split in two by hand for left & right sides. Included with shelf supports, taped to cabinet interior.

High quality wall hanging bracket.

1

2

4

3

'LOCK'

Style - Dimensions & Adjusting the positions

56mm

Aperture of the exposed cut hole:

80.5mm

12mm

88mm

67.5mm

104mm

Nickel covered cover cap. To be fitted once all cabinets are installed. Included with

1

shelf supports taped to cabinet interior. Can be removed if necessary.

53mm

2

Use screwdriver to change the settings:

36mm

30mm

3

25mm

36mm

Edge of cabinet back panel in groove:

Inside of wall unit

Front view of wall unit

Back view of wall unit

1

2

3

Turn anti-clockwise to push unit away from wall. Turn clockwise to tighten cabinet on to wall.

Turn clockwise to LOCK the wall cabinet to wall. Turn anti-clockwise to UNLOCK the wall cabinet from wall.

Turn clockwise to RAISE the wall cabinet. Turn anti-clockwise to LOWER the wall cabinet.

84