Slideline M Assembly v4

Assembly

Step 1 - Mounting Inner Cabinets:

Using suitable expanding wall fasteners fix the mounting plates (x4) ensuring the spacing dimensions and level are correct to hang the cabinets.

Hang the cabinets one at a time and adjust the the mounting brackets so that the cabinets are perfectly level and the sides (cheeks) of the cabinets are parallel and touching.

There should be no steps or gaps between the adjoining edges. when properly adjusted.

Lock the brackets in place as outlined below.

1 - Height Adjustment Screw

To align both cabinets vertically use this screw. Clockwise lifts the cabinet and anti-clockwise lowers it.

Fit Cover After Adjustment

2 - Depth Adjustment Screw

1

To align the front edges of the cabinets use this screw. Clockwise will pull the cabinet toward the wall and anti-clockwise will push the cabinet away from the wall.

2

3

3 - Lock - Unlock Screw

View of inside top corners

Once all adjustment have been completed use this screw to secure the cabinet to the wall bracket. Clockwise will lock the cabinet into position and anti-clockwise will enable the cabinet to be lifted away from the wall.